1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47# Djinn Split Keyboard
The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster. It also has a 5-way tactile switch under the thumb.
Extravagance-wise, it's got audio, encoder support, per-key RGB and RGB underglow... and a 240x320 LCD. And for the safety conscious, it has ESD protection, transient voltage suppression, and polarity protection on both the USB connector as well as the split transport connector (USB-C for rev2+, TRS for rev1).
It also runs [QMK Firmware](https://qmk.fm/)!
Building can be done with:
```
make tzarc/djinn/rev2:default
```
## Rev2a
BOM: [Click](Rev2a/Djinn-BOM.md)
Fixes:
* 5-way tactile moved further away from thumb row
* Different current limiters used for RGB that are actually functional in the required range
## Rev1
BOM: [Click](Rev1/Djinn-BOM.md)
Issues:
* RGB current limiting has been reported to be problematic on Rev1 -- some builds have reported non-functional RGB without overriding the code to enable 1500mA limits
* Measurements taken do not show that the RGB pulls anything close to 1500mA, unknown if there's a manufacturing issue or component selection issue
* 5-way tactile switch is too close to the thumb row in Rev1 and pressing in the down direction can't be achieved very easily
