nuttx /
.codespell-ignore-lines
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181/* Bit fields for LESENSE CURCH */
CURCH,
Linix,
Linix 45ZWN24-40 2 0.5 Ohm 0.400 mH 2.34A 24V
* Linix 45ZWN24-40 (PMSM motor dedicated for NXP FRDM-MC-LVMTR kit)
DUE SCHEM. PIN MAPPING SAM3X DUE SCHEM. BOARD LABEL
SCHEM,
* ADDR -> BTC & TBE - Send one more byte
TBE,
/* All even touch pads have the same position for the THN bits.
/* All odd touch pads have the same position for the THN bits.
THN,
# define AES_ISR_URAT_WORRDACC (5 << AES_ISR_URAT_SHIFT) /* WRONLY register read access */
WRONLY,
* [#14540](https://github.com/apache/nuttx/pull/14540) CMake/preprocess: fix typo PREPROCES -> PREPROCESS
* [#14927](https://github.com/apache/nuttx/pull/14927) spelling: fix spelling typo premption -> preemption
* [#15520](https://github.com/apache/nuttx/pull/15520) drivers/note: fix typo falgs and align local name to irq_mask
* [#4526](https://github.com/apache/nuttx/pull/4526) Rearch video
* [#6447](https://github.com/apache/nuttx/pull/6447) bcm43xxx: Remove bcmf_txavail_work and resue bcmf_tx_poll_work
ans init
* CAF : Depends on CONFIG_NET_PROMISCUOUS
* been lost). If ORE is set along with RXNE then it tells you
/* GIR bits must be masked! */
#define MU_GIER_GIE(n) (1 << (n)) /* Bit n: MUA/MUB General Purpose Interrupt Enable n (GIEn) */
tloadr r1, DEBUG_GPIO @0x80058a PB oen
.word (0x80058a) @ PBx oen
* FLASH_STATUS_WEL: The Write Enable Latch (WEL) bit indicates the
* 1. Enable the SPI and I2C for GroupA and GroupD;
/* HALP - Hall Current and Expected patterns */
#define USIC_TCSR_FLEMD (1 << 2) /* Bit 2: FLE Mode */
* (due to CALL or RCALL instruction).
/* Selete the SCIBR register value */
addd #(TOTALFRAME_SIZE-INTFRAME_SIZE)
addd #INTFRAME_SIZE
unsigned short ATTCH:1;
unsigned long ACEND:1;
unsigned long ENDE:1;
* Description : Clear the specified port's ATTCH-bit; "ATTCH Interrupt
* Description : Enable ATTCH (attach) interrupt of the specified USB
* Description : Disable ATTCH (attach) interrupt of the specified USB
* Description : Disable USB Bus Interrupts OVRCR, ATTCH, DTCH, and BCHG.
/* ATTCH status Clear */
/* ATTCH Clear */
/* ATTCH interrupt disable */
/* ATTCH interrupt enable */
/* The previous command is not accepted, leaving the WEL
* as long as the following conditions are aheared to.
as long as the following conditions are aheared to.
* The licence and distribution terms for any publically available version or
The licence and distribution terms for any publically available version or
* The licence and distribution terms for any publically
The licence and distribution terms for any publically
(WEL bit) and in AAI mode (AAI bit).
#define W25QXXXJV_READ_STATUS_1 0x05 /* SRP|SEC|TB |BP2|BP1|BP0|WEL|BUSY */
#define W25QXXXJV_WRITE_STATUS_1 0x01 /* SRP|SEC|TB |BP2|BP1|BP0|WEL|BUSY */
* WEL=1.
* instruction, WEL=1.
ret = apds9960_i2c_write8(priv, APDS9960_GCONFIG4, (GMODE | GIEN));
uint32_t allo = 0;
allo++;
spiffs_gcinfo("Wipe pallo=%" PRIu32 " pdele=%" PRIu32 "\n", allo, dele);
fs->alloc_pages -= allo;
#define XK_Arabic_tehmarbuta 0x05c9 /* U+0629 ARABIC LETTER TEH MARBUTA */
#define XK_Arabic_teh 0x05ca /* U+062A ARABIC LETTER TEH */
#define XK_Greek_LAMDA 0x07cb /* U+039B GREEK CAPITAL LETTER LAMDA */
#define XK_Greek_LAMBDA 0x07cb /* U+039B GREEK CAPITAL LETTER LAMDA */
#define XK_Greek_lamda 0x07eb /* U+03BB GREEK SMALL LETTER LAMDA */
#define XK_Greek_lambda 0x07eb /* U+03BB GREEK SMALL LETTER LAMDA */
#define XK_Armenian_SE 0x100054d /* U+054D ARMENIAN CAPITAL LETTER SEH */
#define XK_Armenian_se 0x100057d /* U+057D ARMENIAN SMALL LETTER SEH */
#define XK_Armenian_VEV 0x100054e /* U+054E ARMENIAN CAPITAL LETTER VEW */
#define XK_Armenian_vev 0x100057e /* U+057E ARMENIAN SMALL LETTER VEW */
#define XK_Sinh_o2 0x1000ddc /* U+0DDC SINHALA KOMBUVA HAA AELA-PILLA*/
#define XK_Sinh_oo2 0x1000ddd /* U+0DDD SINHALA KOMBUVA HAA DIGA AELA-PILLA*/
#define XK_Sinh_au2 0x1000dde /* U+0DDE SINHALA KOMBUVA HAA GAYANUKITTA */
#define GIEN (1 << 1) /* Bit 1: Gesture Interrupt Enable */
/* See also http://vektor.theorem.ca/graphics/ycbcr/ */
* is in froms[] array which points to tos[] array
" + ofo %d"
% ("txbuf", "rxbuf", "ofo", "local_address", "remote_address")
FAR int_fast32_t *offsetp);
FAR int_fast32_t *offsetp)
ans = (FAR struct dns_answer_s *)nameptr;
* been lost). If ORE is set along with RXNE then it tells you
# define WR9_INTACKEN (0x20) /* Bit 5: Software INTACK Enable */
FAR struct dns_answer_s *ans;
* We use RUNSTALL and RESETING signals to ensure that the App core stops
/* Reply with a WONT, that means we will not work in
/* Reply with a WONT */
exten = (extcfg & ADC_CFGR_EXTEN_MASK);
exten = (extcfg & ADC_EXTREG_EXTEN_MASK);
exten = extcfg & ADC_EXTREG_EXTEN_MASK;
if (exten > 0)
setbits = (extsel | exten);
setbits = extsel | exten;
uint32_t exten = 0;
* SPDX-FileContributor: Daniel Pereira Volpato <dpo@certi.org.br>
* SPDX-FileContributor: Guillherme da Silva Amaral <gvr@certi.org.br>
* SPDX-FileCopyrightText: 2019 Fundação CERTI. All rights reserved.
Copyright (C) 2019 Fundação CERTI. All rights reserved.
* SPDX-FileCopyrightText: Fundação CERTI. All rights reserved.
/* TSS (IST) for 64 bit long mode will be filled in up_irq. */
/* IST data structures ******************************************************
/* NOE, NWE, NE1, NBL1 */
/* NOE, NWE, and NE1 */
/* NOE, NWE, and NE3 */
/* NOE, NWE */
* PD4: FSMC NOE PE2: FSMC A23
* SCL High Time: Thi = divider * SCLhi
* Fscl = Finput / (Thi + Tlo)
* If Thi == TloL: Fscl = Finput / (divider * SCL * 2)
* Thi = Tspi * CLKCFG.high
* Fbaud = 1 / (Thi + Tlow)
* If we assume that Thi == Tlow, then:
* Thi = Tspi * CLKCFG.high
* Fbaud = 1 / (2 * Thi)
* Te = (3/2) * p * (lambda_d * i_q - lambda_q * i_d)
* Te = (3/2) * p * (lambda_m * i_q + (L_d - L_q) * i_q * i_d)
* Te = (3/2) * p * i_q * (lambda_m + (L_d - L_q) * i_d)
* Pem = wm * Te
* Te = Tl + Td + B * wm + J * (d/dt) * wm
* Te = Tl + J * (d/dt) * wm
* (d/dt) * wm = (Te - Tl) / J
* Te - electromagnetic torque
* R0 = saveregs = pinter saved array
/* Get EXTEN and EXTSEL from input */
set(SRCS regcomp.c regexec.c regerror.c tre-mem.c)
CSRCS += regcomp.c regexec.c regerror.c tre-mem.c
#include "tre.h"
/* from tre-compile.h
/* from tre-ast.c and tre-ast.h
/* from tre-stack.c and tre-stack.h
/* from tre-parse.c and tre-parse.h
/* from tre-compile.c
/* from tre-mem.h: */
* libs/libc/regex/tre.h
* libs/libc/regex/tre-mem.c
libs/libc/tre.h
libs/libc/tre-mem.c
#define EDMA_ES_NCE (1 << 3) /* Bit 3: NBYTES/CITER Configuration Error (NCE) */
#define EDMA_CH_ES_NCE (1 << 3) /* Bit 3: NBYTES/CITER Configuration Error (NCE) */
#define CAN_RERRAR_NCE (1 << 24) /* Bit 24: Non-Correctable Error (NCE) */
#define PINT_PMCTRL_SELPMATCH (1 << 0) /* Bit 0: Rin interrupts interrupt or pattern match function */
#define STR71X_IRQ_T0TOI (29) /* IRQ 29: T0.TOI Timer 0 Overflow interrupt */
#define CP0_CONFIG_KU_SHIFT (25) /* Bits 25-27: KUSEG and USEG cacheability */
#define NT_PPC_TM_CFPR 0x109 /* TM checkpointed FPR Registers */
#define FT08X_EFFECT_CHACK 0x58 /* Chack */
#define XK_Thai_fofa 0x0dbd /* U+0E1D THAI CHARACTER FO FA */
* ODER -> disabled
gpioinfo(" ODER: %08x OVR: %08x PVR: %08x PUER: %08x\n",
uint32_t fpr;
fpr = getreg32(STM32_EXTI_FPR1);
if (((rpr & mask) != 0) || ((fpr & mask) != 0))
* (SPOFF Bits 0-7 = 0xA5) */
* (SPOFF Bits 8-9 = 0); (SPON Bits 8-9 = 0) */
[ESR_ELX_EC_SME] = "SME",
[ESR_ELX_EC_SME] = "SME",
IS_PADD(segment_hdr.load_addr) ? "padd" :
ret = register_mtddriver("/dev/fram", mtd_dev, 0755, NULL);
ret = nx_mount("/dev/fram", "/mnt/lfs", "littlefs", 0,
* TWRITE/TREAD
/* size[4] Tread tag[2] fid[4] offset[8] count[4]
* (see http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf) uses this
* PERIPHERAL 10AA AAS. IIII IIII MMMM MMMM MMMM MMMM
leas 2, sp
* To initialize the nCE, configure any PIO as an output pin (refer to Tips
* and Tricks for the supported nCE connection types)
* PCM Clock = (Crystal * (ND + 1 + FRACR/2^22) / (QDPMC + 1)) / 8
/* The Figure of Merit (FoM) characterizing the ranging measurement */
* | 0 | 1 | x | EXT | RIN | IN | off |
* FIFO mode, INT1 , THS 0
* REG03[3] ITERM Termination Current Limit 128-1024mA Default: 256mA
FAR usbdev_fs_waiter_sem_t *sems; /* List of blocking request */
FAR usbdev_fs_waiter_sem_t *cur_sem = fs_ep->sems;
fs_ep->sems = NULL;
fs_ep, &fs_ep->sems, queue);
fs_ep, &fs_ep->sems, &fs_ep->reqq);
#define RTPROT_RA 9 /* RDISC/ND router advertisements */
/* Followed by one or more ND options */
* message using the Neighbor Discovery (ND) protocol. It then listens